Company Contact us

  • Flat drippers irrigation lines
  • Tape dripper irrigation lines
  • Round drippers irrigation lines
  • Dripper pipe
  • Lettuce_Rows_tape-type
  • Flat drippers irrigation lines
Flat drippers irrigation lines1 Tape dripper irrigation lines2 Round drippers irrigation lines3 Dripper pipe4 Lettuce_Rows_tape-type5 Flat drippers irrigation lines1
Home   >   Our business   >   Micro-drip irrigation pipes   >   Flat dripper

Flat dripper emitter

Flat dripper thin wall emitter production line

 
LIR106Download PDF brochure...
LIR106

LIR 106 - High speed extrusion line for thin wall pipes with flat drippers

T.H.E. high performance extrusion systems are designed to produce irrigation pipes fully automatic, with highest dripper inserting and punching frequency, perfect carbon black distribution as well as a high degree of inline quality control and automation. These achievements are possible due to the latest technologies in Laser punching, dripper sorting and state of the art process technologies.

Some of these lines are designed to produce at speeds of 250 m/min and an inserting frequency of 2500 drippers/minute. To achieve such performances, solutions were developed which combine mechanical and electronic features, requiring good technical knowledge, both in maintenance and operation. More than 20 patents were filed during this time. These lines are used by pipe producers with important market share and very high production volume.

Pipe

Drip irrigation line

Spool

Technical data

LIR 106

LIR 106 HP

Diameter of the pipe   12 - 36 mm   12 - 36 mm
Wall thickness of the pipe 0.15 - 0.60 mm 0.15 - 0.60 mm
Geared speed 200 m/min    300 m/min 
Production speed * 150 m/min   250 m/min
Take up   Automatic
  Fully automatic
Dripper type Flat dripper   Flat dripper
Dripper frequency   Up to 900 d/min   Up to 2000 d/min
Dripper spacing   min 15 cm   min 10 cm
Puncher type   Mechanical   Laser
Spool diameter   300 - 600 mm   300 - 600 mm

*) depends on dripper design and wall thickness


Line layout

LIR106





T.H.E. MACHINES also delivers turn-key solutions to produce Drip irrigation pipes starting from the plastic pellet to the finished packed, tested and palletized product.


Our sales staff will be pleased to inform you, in a personal discussion, in more detail about these features and to explain the cost calculation in comparison to the investment level for each solution.




Flat dripper medium wall emitter line

 
LIR212Download PDF brochure...
LIR 212

LIR 212 - High speed extrusion line for medium wall and thick wall pipes with flat drippers

T.H.E. high performance extrusion systems are designed to produce irrigation pipes fully automatic, with highest dripper inserting and punching frequency, perfect carbon black distribution as well as a high degree of inline quality control and automation. These achievements are possible due to the latest technologies in Laser punching, dripper sorting and state of the art process technologies.

Some of these lines are designed to produce at speeds of 250 m/min and an inserting frequency of 2500 drippers/minute. To achieve such performances, solutions were developed which combine mechanical and electronic features, requiring good technical knowledge, both in maintenance and operation. More than 20 patents were filed during this time. These lines are used by pipe producers with important market share and very high production volume.


Medium wall pipe

Laser punching machine and coiler

Shrink foil coil

Technical data

LIR 212

LIR 212 HP

 
Diameter of the pipe   16 - 20 mm   16 - 20 mm  
Wall thickness of the pipe 0.2 - 1.0 mm 0.2 - 1.0 mm  
Geared speed 200 m/min    250 m/min   
Production speed * 150 m/min   200 m/min  
Coiler Automatic
  Fully automatic  
Dripper type Flat dripper   Flat dripper  
Dripper frequency Up to 900 drippers/min   Up to 2000 drippers/min  
Dripper spacing min 15 cm   min 10 cm  
Puncher type Mechanical Laser
Coil outside diameter 800 - 1000 mm   800 - 1000 mm  
Coil inside diameter 400 - 500 mm 400 - 500 mm
Coil heigth 280 - 400 mm 280 - 400 mm

*) depends on dripper design and wall thickness


LIR212



T.H.E. MACHINES also delivers turn-key solutions to produce Drip irrigation pipes starting from the plastic pellet to the finished packed, tested and palletized product.


Our sales staff will be pleased to inform you, in a personal discussion, in more detail about these features and to explain the cost calculation in comparison to the investment level for each solution.


 

Flat dripper slitted thick wall emitter line

 
LIS106
LIS106

LIS 106 - High speed extrusion line for thin wall pipes with special flat drippers

T.H.E. high performance extrusion systems are designed to produce irrigation pipes fully automatic, with highest dripper inserting and punching frequency, perfect carbon black distribution as well as a high degree of inline quality control and automation. These achievements are possible since our latest development in mechanical slitting units, our high performance dripper sorting and state of the art process technologies.

Some of these lines are designed to produce at speeds of 250 m/min and an inserting frequency of 2500 drippers/minute. To achieve such performances, solutions were developed which combine mechanical and electronic features, requiring good technical knowledge, both in maintenance and operation. More than 20 patents were filed during this time. These lines are used by pipe producers with important market share and very high production volume.

Pipe

Drip irrigation line

Spool

Technical data

LIS 106

   
Diameter of the pipe min - max 12 - 34 mm  
Wall thickness of the pipe min - max 0.15 - 0.60 mm  
Flow rate per position min - max 0.6 - 4 l/h  
Spacing min. 10 cm  
Geared speed 250 m/min  
Production speed * max 200 m/min  
Dripper type Flat NPC dripper    
Dripper frequency   Up to 2000 d/min  
High perf. slitter   Mechanical    
Slitter frequency   up to 2000 slits/min  
Take up   Automatic    
Spool diameter min - max 300 - 610 mm  
Spool weight max. 30 kg  
Stripe marking
Laser Printing
Microhole detection
Automatic spool extraction
       on conveyor
  optional    

*) only with specific dripper, + depending on pipe design and wall thickness


Line layout

LIR106





T.H.E. MACHINES also delivers turn-key solutions to produce Drip irrigation pipes starting from the plastic pellet to the finished packed, tested and palletized product.


Our sales staff will be pleased to inform you, in a personal discussion, in more detail about these features and to explain the cost calculation in comparison to the investment level for each solution.